New Page 1

Transmissions, Adapters,
Flex plates, etc..


		27

TH400 - Built in house to match your custom built engine - from $800 + converter.

Gear Vendors Overdrive Units - Pricing includes required electronics.@ $2395 and up.

Transmission Adapter Kit @ $129.00

Just like it says, this kit adapts the Cad 472/500/425 to a Chevy/GMC bell housing bolt pattern. This is not your El Cheapo $29.95 piece of sheet metal. We're talking 5/16" cold rolled steel, CNC cut, built to transfer the Cadillac torque through the rest of the drive train. Supplied with a mounting bolt kit and shims to set your converter end play.
Billet TC locator extension bushing (IF you need it) @ $20

For mating a Cad 472/500 to a ’64-’67 OE Cad TH400 @ $149
Other Adapters available. Specify application when ordering.

Billet Steel Flex Plate @$265.00

When hooking up a Caddy to a Chevy or GMC converter, ya gotta keep in mind that the bolt pattern on the converter must match the hole pattern on the flex plate. TH-400 converters all have the “large” diameter pattern, but ‘Glides, TH-350, 700R4, and TH200 trannies have a smaller pattern. You can’t safely drill out the flex plate because the smaller circle falls on the stress ridge on the Cad flex plate. Three holes in there and your chances of blowing the middle out of the flex plate are pretty good.

For 429 w/ TH400, TH350, 700R4, etc.. (OE or adapted) @ $295

Billet Steel Flywheel @ $325

166-tooth ring gear (std. Cad starter); accepts all popular 10”, 10½” and 11” clutches. Killer!
All billet Flexplates and Flywheels are available SFI certified for an additional charge.

Cad pilot bushing for manual transmissions @ $30
No crank removal or precision machining required in most cases.
For standard GM input shaft size.

Cad Drive Hub, 1 3/8" 10 Spline @ $245
Billet Steel drive hub for Brent Trans and others. Splines hardened to R53 for long life.

Bellhousing / Scattersheild @ $345
With correct Caddy bolt pattern. Scatter shields include block plate, SFI Certified.

Tubular Cross Member Kit @ $150.00

Fits ‘78+ G Body with clearance for up to 3 1/2" dual exhaust.
Made to bolt in stock location on frame, sturdy MIG-welded tube construction.
Available for most popular transmissions.

CAD Company
The originators of performance parts for the Cad 472"/500"/425" !

You may order by phone, fax, or email.
Phone (505) 823-9340 - Fax (505) 797-0627
email: sales@cad500parts.com

8333 Jefferson St. N. E.
Albuquerque, NM 87113